WOODWORKING MACHINERY
MACHINERY DIRECTORY
Explore sanding equipment for surface preparation and wood finishing.
The published selection includes wide-belt sanders and compact belt or drum arrangements. Working width, minimum part length and thickness range must fit your actual components. The SR-RP1000A and adjacent SR-R1000A tables have different limits, so retain the exact model in a quotation. The Cuijia 910×100 designation is not treated as a verified belt dimension or capacity. Supply sample material and define stock removal and final finish. Confirm sanding-head sequence, abrasive selection, feed conditions, extraction and compressed-air requirements; judge sanding quality on your own sample boards, since installed power alone tells you little.
Use the same component or incoming material to ask each supplier a comparable question. The entries below identify a selection issue for each published record. They are not test scores or a ranking of manufacturers.
| Published equipment | Selection issue | Ask in the quotation |
|---|---|---|
| 910×100 curved, vertical and flat sander Leling Cuijia Woodworking Machinery | Do not decode the designation into an unverified capacity | What does the 910×100 designation mean for this exact machine? |
| MSGR-R1900 heavy wide belt sander Qingdao Ronghongxiang Woodworking Machinery | Head arrangement matters alongside working width | Which rollers, pad and sanding-head sequence are supplied? |
| MM2420A vertical and horizontal belt sander Weihai Chuancheng Woodworking Machinery | Distinguish belt speed, spindle speed and support dimensions | What support and orientation suit the intended component? |
| SR-RP1000A twin-head wide belt sander Qingdao Fengjia Weiye / Finetech | Do not substitute the adjacent model column | Does the quotation explicitly identify SR-RP1000A? |
| 650 mm wood board belt sander Qingdao Shengwang Woodworking Machinery | Check the smallest part as well as the widest board | What is the exact configuration or order code for the 650 mm listing? |
A missing answer stays unconfirmed. Working area, wheel diameter, tape height, motor ratings and process counts must retain their original labels; they are not interchangeable capacities. Keep accessories, handling, utilities and the sample acceptance job explicit when comparing offers.
Numeric ranges match where capacities overlap. Selected values must all match; series combinations require manufacturer confirmation.
0 products excluded because selected specifications are not published.
Sanding machines
The 910×100 listing is a woodworking sander described for curved, vertical and flat sanding. It appears within Cuijia’s woodworking sanding range, and the product photograph shows the machine’s belt arrangement. The designation is reproduced as the manufacturer presents it; it i…
Sanding machines
The MSGR-R1900 is a heavy wide belt sander with a listed working width of 1900 mm and a workpiece thickness range of 2 to 110 mm. Its feed speed range is 5 to 25 metres per minute. The specification gives 105.87 kW total power and a belt size of 2460 by 1920 mm. The machine desc…
Sanding machines
The MM2420A is a vertical and horizontal sanding machine with a listed work table size of 1000 by 310 mm. The sanding belt measures 2262 by 300 mm and runs at a stated speed of 576 metres per minute. The specification also lists a 100 by 200 mm pneumatic sanding drum. Motor powe…
Sanding machines
The Finetech SR-RP1000A is a twin-head wide-belt sander with a 1000 mm working width. It takes boards 2 to 160 mm thick and at least 540 mm long, at a feed speed adjustable from 5 to 30 m/min. The belts measure 1030 × 2200 mm and total installed power is 40.92 kW. It has belt os…
Sanding machines
This Shengwang wide-belt board sander handles workpieces 40 to 650 mm wide, 2.5 to 90 mm thick and at least 200 mm long. Feed speed is adjustable from 6 to 30 m/min. It runs a 660 × 1800 mm abrasive belt, has 16.74 kW of total motor power, works at 0.55 MPa air pressure and weig…