WOODWORKING MACHINERY

MANUFACTURER DOSSIER · CHINA

Leling Cuijia Woodworking Machinery

Cuijia’s flat and shaped sanding tools

Leling Cuijia manufactures woodworking sanding equipment in Leling, Shandong. Its range includes elongated flat sanders, manually pressed flat sanders, curved and flat belt machines, wide-surface sanders, benchtop machines and vertical sanding arrangements. [1]

Prepare a sourcing requestExplore documented equipment ↓

Compiled by WoodworkMill Editorial Team · Sources checked

Check project fitDecisions specific to this supplier →Inspect the equipmentChecked model values and limits →Prepare your enquiryEdit and copy a factory brief →

DOCUMENTED EQUIPMENT

A concrete starting point for selection

The records below describe individual equipment configurations. Ask about other models in the company’s range separately.

Manufacturer product information · checked 2026-09-26

910×100 curved, vertical and flat sander

The 910×100 listing is a woodworking sander described for curved, vertical and flat sanding. It appears within Cuijia’s woodworking sanding range, and the product photograph shows the machine’s belt arrangement. The designation is reproduced as the manufacturer presents it; it is not treated as a confirmed belt dimension or working capacity. The individual product page does not state motor power, belt speed or numerical workpiece limits. Its value for initial selection is the stated sanding application and the illustrated machine arrangement. [2]

Published specification snapshot · 910×100 curved, vertical and flat sander
SpecificationDocumented value
Product designation910×100
Sanding applicationsCurved, vertical and flat
Equipment familyWoodworking sanding machine
Read the complete model record and selection notes →

Company background

The company also lists woodworking clamps and pneumatic sanding drums. These products cover component finishing tasks with different surface shapes and handling needs. Buyers can describe the part geometry and the surface to be finished to establish whether a flat, curved or combined sanding arrangement is the appropriate starting point.

Cuijia’s company introduction traces its business to 1984 and publishes a range of flat, hand-fed, curved, wide-face and bench belt sanders, clamps and sanding accessories. Treat the history as an official statement rather than a checked foundingDate. The range addresses several part shapes and ways of presenting the workpiece to an abrasive.

From the manufacturer’s published information. [1]

Equipment scope and production

The company describes CAD-assisted product design. Its product navigation separates woodworking sanding, metal sanding and profile finishing. CAD use does not establish measured part accuracy, and a belt-size label alone does not define the usable workpiece envelope or surface result.

From the manufacturer’s published information. [1]

Service and documentation

For the reviewed 910 × 100 listing, obtain the exact order code and an explanation of what those dimensions refer to. Ask for the drive, feed or hand-presentation arrangement, work support and abrasive-change procedure. No confirmed feed speed or motor-power value is available in this record, so a production-rate comparison would be premature.

From the manufacturer’s published information. [1]

Project fit

Cuijia lists several belt-sanding arrangements, shaped-surface machines, workholding accessories and separate metal-finishing products. Keep the woodworking operation explicit and identify the surfaces that must be reached on a component. The 910×100 record is application-led rather than a complete numerical specification. Ask for the exact machine and work support used in the proposal. Its catalogue range can help frame questions, but a name or photograph should not be treated as evidence of dimensional suitability.

Based on the documented range. Compare each model above.

Purchase decisions for this factory

The meaning of 910 × 100, drive power, speed and workpiece limits remain unconfirmed.

The following is WoodworkMill purchasing guidance based on this profile and its documented equipment. Each row defines a decision to resolve; it does not assert that an option, service or acceptance result is already available.

Purchase decisions and documents to request
Your decisionWhat to defineEvidence to request
Shaped-part sandingReach, contact surface and work supportDemonstration on the actual difficult-to-reach areas
Designation comparison910 × 100 may not describe workpiece capacitySupplier explanation of the designation
Wood versus metalSeparate catalogue material categoriesConfiguration and abrasive selected for the intended material

Documents to request

Ask for the documents below against the supplying entity and the offered configuration. An unanswered item remains open rather than becoming a confirmed capability.

Requested documents for this supplier
Document purposeScope to specifyUseful deliverable
Unresolved dimensionsMeaning of 910 × 100 and usable work envelopeIdentified order code and dimensional drawing
Drive and handlingMotor, speed, feed or hand-presentation methodConfiguration sheet and operating instructions
Finish trialActual component and fixtureRecorded contact, abrasive and finished sample

Prepare a useful enquiry

Include a part drawing, material and example of the required finish in an enquiry. Ask the manufacturer to confirm the meaning of the designation, actual belt size, power supply and work support arrangement. A sample sanding trial can help establish whether the machine reaches the intended curved and flat surfaces without additional fixtures.

Send a component drawing that identifies the curves, faces and inaccessible areas, together with a sample or description of the incoming surface. Ask for the proposed contact surface, work support and abrasive. Agree a demonstration on the same component format and define the finished surface to inspect. Include the required fixture, guarding and extraction arrangement in the written supply list.

Questions before a written offer

What does the 910×100 designation mean for this exact machine?

Discuss this point using the exact 910×100 curved, vertical and flat sander designation. The source uses 910×100 as a product designation. The reviewed page does not explain that number as a belt size or a working dimension, so neither interpretation is adopted here. Power, belt speed and numerical workpiece limits are also missing. The record supports an initial enquiry for curved, vertical and flat sanding, with dimensional selection deferred until the supplier supplies a model-specific specification.

What does the 910 × 100 label actually identify?

The reviewed listing has unresolved model and capacity details. Identify whether the dimensions label an abrasive, machine element or workpiece limit before selecting it.

Can output be calculated from this record?

Obtain the drive power, permitted part sizes and work-presentation method. No confirmed feed specification is available for calculating parts per shift.

Review boundaries

WoodworkMill Editorial Team compiled this profile from the source records listed below. Factory representation is established separately through the platform’s claim process. Equipment descriptions and company-published procedures do not amount to a witnessed factory inspection. Source-specific dates distinguish each company and model review from this editorial update. Any older source capture remains dated as such.

Sources

No independently confirmed authority record added to this profile. Company claims remain attributed to the manufacturer.

Sources and check dates
  1. Official company introduction

    Manufacturer-published material · Checked

    Company background and the equipment or service scope explicitly described in the company introduction. Company statements are attributed; factory inspection, certificate validity and model performance remain separate checks. The company text was readable, although the browser did not complete all page resources.

  2. Official 910×100 curved, vertical and flat sander record

    Manufacturer product documentation · Checked

    The documented model and its published specifications; see the linked equipment record.

Our information standard · Report a correction

YOUR NEXT STEP

Take a useful brief into the enquiry

Use the supplier-specific selection notes in this editable brief. Edits remain on this page until you copy them; opening the request form selects the factory but does not automatically send or carry over the edited text.

Prepare this factory enquiryCompare listings →