WOODWORKING MACHINERY
MODEL SELECTION & PROCUREMENT
Documented manufacturer: Weihai Chuancheng Woodworking Machinery
The MM2420A is a vertical and horizontal sanding machine with a listed work table size of 1000 by 310 mm. The sanding belt measures 2262 by 300 mm and runs at a stated speed of 576 metres per minute.
The MM2420A is a vertical and horizontal sanding machine with a listed work table size of 1000 by 310 mm. The sanding belt measures 2262 by 300 mm and runs at a stated speed of 576 metres per minute. The specification also lists a 100 by 200 mm pneumatic sanding drum. Motor power is 1.5 kW, and spindle speed is given as 1700 rpm. Machine weight is 116 kg, with overall dimensions of 1100 by 902 by 500 mm.
Manufacturer data checked 2026-09-26 · Source [1].
| Specification | Documented value | Reviewed |
|---|---|---|
| Work table size | 1000 × 310 mm | 2026-09-26 |
| Sanding belt size | 2262 × 300 mm | 2026-09-26 |
| Belt speed | 576 m/min | 2026-09-26 |
| Motor power | 1.5 kW | 2026-09-26 |
| Machine weight | 116 kg | 2026-09-26 |
The MM2420A combines vertical and horizontal sanding arrangements. Use the component surfaces and work support to determine which arrangement is relevant to the task.
A 1000 × 310 mm table does not establish the maximum component envelope, and 576 m/min is belt speed, not conveyor feed or finished parts per minute.
Editorial interpretation of the manufacturer-published values, not a witnessed performance test.
| Published item | What it describes | Your next check |
|---|---|---|
| 1000 × 310 mm table | Support surface | Show how the part is supported during each operation. |
| 576 m/min belt speed | Abrasive movement | Do not use it to calculate workpiece output. |
| 100 × 200 mm pneumatic drum | Listed accessory geometry | Confirm its use, supplied abrasives and contact arrangement for the component. |
The MM2420A record lists belt speed in metres per minute and spindle speed in revolutions per minute; those figures cannot be compared as one feed-speed rating. Its table, belt and pneumatic drum dimensions describe different components. Confirm which arrangement reaches the surfaces on your part. The listed overall dimensions should be checked against the offered stand and accessories rather than treated as a complete installation footprint.
Describe the component shape and the surfaces to be sanded when requesting a proposal. Confirm how the belt and drum arrangements support that task and which abrasives are supplied. Check the required guarding, extraction connection and workshop positioning, as well as whether the listed dimensions include the stand or other accessories supplied with the machine.
Use sample components with the intended straight and curved surfaces. Ask the supplier to show the selected orientation and support arrangement and identify the belt and drum abrasives used. Define the surface result to inspect rather than requiring a catalogue speed alone. Request the supplied guarding, extraction connection, abrasive replacement method and the space needed for the workpiece path.
Match the Chuancheng/Qiquan naming to the supplier and specify the MM2420A sanding orientation.
These are requested purchasing deliverables, not evidence already supplied or tests witnessed by WoodworkMill. Tie each response to the exact model and quoted options.
| Required clarification | Scope for this purchase | Requested record |
|---|---|---|
| Configuration detail | Vertical/horizontal arrangement and abrasive support | Machine sheet and tooling schedule |
| Handling trial | Curves, edges and operator access | Sample-finish record and handling sequence |
| Supply identity | Brand wording and service provider | Supplier identity and written warranty scope |
No. It is the movement of the abrasive. Production depends on handling and the required sanding passes, which should be timed on a representative component.
No representative production run has been witnessed by WoodworkMill for this record. Agree the material, tooling, operator tasks, trial duration and allowed defects. Count first-pass accepted parts separately from parts accepted after rework, and include agreed stoppages when reporting sustained output.
Ask each bidder to answer the same brief and list standard equipment, selected options, excluded auxiliaries, commissioning, training and spare parts separately. Price, delivery time and warranty remain quotation-specific; this page supplies no current offer.
The numerical and configuration claims above come from the named manufacturer’s product material retained privately by WoodworkMill. Review dates appear below. Selection and acceptance suggestions are WoodworkMill editorial guidance; they are not claims that a suggested fixture, test, safety function or accessory is fitted. A manufacturer profile does not verify this model’s certification, current availability or destination compliance. Resolve the explicitly missing or conflicting limits in writing before ordering.
Manufacturer source · checked 2026-09-26. Model description and the specification rows above.
Updated 2026-10-11. The comparison table, enquiry brief, questions and suggested trial are written to help you buy; the specification values come from the manufacturer.
Where a figure is missing or two figures disagree, ask the factory to confirm the value in writing for your order.
Edit the fields below, then copy the brief or open a sourcing request with this model selected. The edited brief stays on this page and is not automatically sent or added to that form.