WOODWORKING MACHINERY
Two sanding heads in sequence let one pass do two jobs: the first head removes stock and evens out thickness, the second refines the surface. That suits furniture parts, doors and panels up to 1000 mm wide that need calibrating and smoothing before coating. The 160 mm thickness capacity also covers thick solid-wood parts.
MODEL SELECTION & PROCUREMENT
SR-RP1000A twin-head wide belt sander
Documented manufacturer: Qingdao Fengjia Weiye / Finetech
The Finetech SR-RP1000A is a twin-head wide-belt sander with a 1000 mm working width. It takes boards 2 to 160 mm thick and at least 540 mm long, at a feed speed adjustable from 5 to 30 m/min.
Check the modelDocumented values and source dates →Check your applicationFit, limits and questions to ask →Prepare the purchaseCopy a specific enquiry brief →
Documented machine and specification
The Finetech SR-RP1000A is a twin-head wide-belt sander with a 1000 mm working width. It takes boards 2 to 160 mm thick and at least 540 mm long, at a feed speed adjustable from 5 to 30 m/min. The belts measure 1030 × 2200 mm and total installed power is 40.92 kW. It has belt oscillation monitoring and an anti-rebound device for the workpiece, and weighs 3550 kg.
Manufacturer data checked 2026-09-26 · Source [1].
| Specification | Documented value | Reviewed |
|---|---|---|
| Working width | 1000 mm | 2026-09-26 |
| Workpiece thickness | 2–160 mm | 2026-09-26 |
| Minimum workpiece length | 540 mm | 2026-09-26 |
| Belt size | 1030 × 2200 mm | 2026-09-26 |
| Total installed power | 40.92 kW | 2026-09-26 |
What the SR-RP1000A is built to do
Width, thickness and length
Parts must be up to 1000 mm wide, 2–160 mm thick and at least 540 mm long. The 540 mm minimum length is the limit to watch: short drawer fronts or rails below that length need another machine or a carrier board. Send your shortest part when you ask for a quote.
Finetech's table also lists an SR-R1000A with different minimum length and thickness limits. Check that the quotation and data sheet say SR-RP1000A.
Heads, belts and safety devices
Belts are 1030 × 2200 mm, a little wider than the working width so they cover the full panel. Oscillation monitoring keeps each belt tracking side to side so it wears evenly and stays on the rollers. The anti-rebound device stops a part being thrown back toward the operator.
Which grits and head types give your finish depends on the material and the incoming surface; ask Finetech to state them for the sample run.
Configuration and installation questions
| Topic | Published value | Ask for |
|---|---|---|
| Width | 1000 mm | Head types and sequence |
| Thickness | 2–160 mm | Thickness setting and readout |
| Length | 540 mm minimum | Handling of shorter parts |
| Feed | 5–30 m/min | Recommended speed for your finish |
| Belts | 1030 × 2200 mm | Grits supplied |
| Power and weight | 40.92 kW; 3550 kg | Electrical connection, air and extraction volume |
Compare with other sanders
Among the sanding machines listed here, the Shengwang 650 mm board sander is the narrower option, and the Ronghongxiang MSGR-R1900 heavy wide-belt sander takes panels up to 1900 mm wide. Choose by your widest panel and how many heads your finish needs. Curved and profiled parts need a different machine altogether, such as the Cuijia 910 × 100 sander for curved work.
A trial on your own panels
Send panels with your real incoming surface. Say whether the trial is to calibrate thickness or to produce a finish for coating. Ask Finetech to record head setup, grits and feed speed, and to measure thickness before and after at several points.
Documents to request
| Requested document | Purchasing purpose |
|---|---|
| SR-RP1000A specification sheet | Fixes width, thickness, length and power |
| Head and abrasive description | Shows how the finish is produced |
| Commissioning and final inspection records | Confirms the machine before shipment |
| Layout and utilities sheet | Plans power, air and extraction |
Your model-specific enquiry checklist
- Panel material and widest panel
- Shortest part
- Thickness range and incoming variation
- Calibration, finish sanding or both
- Air and extraction available
Buyer questions
Can it sand parts shorter than 540 mm?
The minimum length is 540 mm. Ask Finetech how it would handle any shorter parts.
What is the difference from the SR-R1000A?
The two models have different length and thickness limits. Compare both columns and order by the full code.
What do the two heads do?
Ask Finetech which head types it fits and the grits for your finish.
Confirm in writing before ordering
- Model code SR-RP1000A on the contract
- Head types, grits and feed speed for your finish
- Handling of your shortest part
- Power, air and extraction requirements
- Commissioning and inspection records for your machine
Sources
- Qingdao Fengjia Weiye / Finetech — SR-RP1000A twin-head wide belt sander product page
Manufacturer source · checked 2026-09-26. Model description and the specification rows above.
- Buying guidance on this page
Updated 2026-10-11. The comparison table, enquiry brief, questions and suggested trial are written to help you buy; the specification values come from the manufacturer.
Where a figure is missing or two figures disagree, ask the factory to confirm the value in writing for your order.
Take a useful brief into the enquiry
Edit the fields below, then copy the brief or open a sourcing request with this model selected. The edited brief stays on this page and is not automatically sent or added to that form.