WOODWORKING MACHINERY
MANUFACTURER DOSSIER · CHINA
Finetech’s focus on sanding and connected preparation
Qingdao Fengjia Weiye builds sanding machinery under the Finetech name in Jiaozhou, Qingdao. The company designs, produces and services wide-belt sanders, planer-sanders, primer sanders and linked sanding lines. [1]
DOCUMENTED EQUIPMENT
The records below describe individual equipment configurations. Ask about other models in the company’s range separately.
Manufacturer product information · checked 2026-09-26
The Finetech SR-RP1000A is a twin-head wide-belt sander with a 1000 mm working width. It takes boards 2 to 160 mm thick and at least 540 mm long, at a feed speed adjustable from 5 to 30 m/min. The belts measure 1030 × 2200 mm and total installed power is 40.92 kW. It has belt oscillation monitoring and an anti-rebound device for the workpiece, and weighs 3550 kg. [2]
| Specification | Documented value |
|---|---|
| Working width | 1000 mm |
| Workpiece thickness | 2–160 mm |
| Minimum workpiece length | 540 mm |
| Belt size | 1030 × 2200 mm |
| Total installed power | 40.92 kW |
Each machine type does a different job, from calibrating raw panels to sanding between coats of paint, so a buyer can match the machine to the step in the finishing process.
The company's Chinese page names it Qingdao Fengjia Weiye Woodworking Machinery, based in Jiaozhou, Qingdao, and describes the design, production and sale of sanding and planer-sanding equipment. Finetech is the brand on its machines. Use the full Chinese company name on contracts.
From the manufacturer’s published information. [1]
Finetech describes four inspection points: incoming materials, inspection during production, checks during machine commissioning and a final inspection before dispatch. It says quality engineers and inspection equipment carry out these checks. Ask for the commissioning and final inspection records for your machine when it is ready to ship.
The range separates machines by task:
A primer sander and a calibrating sander are set up differently, so name the step you need in the enquiry.
The company describes checks when purchased materials arrive.
Inspection during production is named in the official introduction.
The company describes inspection during machine commissioning.
A final inspection is described before equipment leaves the factory.
Inspection steps as the company describes them.
From the manufacturer’s published information. [1]
Finetech suits furniture, door and panel makers who sand boards up to 1000 mm wide and want a twin-head machine for calibrating and finishing, as well as finishing shops that need a dedicated primer sander. The SR-RP1000A on this site is a twin-head 1000 mm wide-belt sander for boards 2 to 160 mm thick.
For narrower parts, compare the Shengwang 650 mm board sander; for curved and edge work, the Cuijia 910 × 100 curved, vertical and flat sander is a different kind of machine. For panels wider than 1000 mm, the Ronghongxiang MSGR-R1900 heavy wide-belt sander among our sanding machines works to 1900 mm.
Based on the documented range. Compare each model above.
| Buying decision | What the factory publishes | Ask for |
|---|---|---|
| Sanding task | Wide-belt, planer-sander, primer sander, lines | The machine type for your step |
| Width and thickness | SR-RP1000A: 1000 mm, 2–160 mm | The full model code on the offer |
| Line or single machine | Linked sanding lines | Conveyors and interfaces with your equipment |
| Requested document | Purchasing purpose | Detail for Finetech |
|---|---|---|
| Model sheet | Fixes the machine in the contract | SR-RP1000A, not the SR-R1000A column |
| Head arrangement | Matches sanding to your finish | Head types, belt grits, contact rolls |
| Commissioning record | Shows results on your panels | Thickness and surface results |
| Final inspection record | Confirms the machine before shipment | Checks listed by the factory |
Send the panel material, size range, incoming thickness variation and the finish required. Say whether the machine calibrates raw board, finishes for coating, or sands primer. Give your power, air and extraction capacity.
Finetech publishes the SR-RP1000A next to an SR-R1000A with different length and thickness limits. Make sure the quotation names the RP model if that is the one you want.
Finetech describes commissioning and pre-dispatch checks. Ask for the records for your own machine.
If you paint panels, ask whether the finishing step needs a separate primer sander.
No independently confirmed authority record added to this profile. Company claims remain attributed to the manufacturer.
Manufacturer-published material · Checked
Company background and the equipment or service scope explicitly described in the company introduction. Company statements are attributed; factory inspection, certificate validity and model performance remain separate checks.
Manufacturer product documentation · Checked
The documented model and its published specifications; see the linked equipment record.
YOUR NEXT STEP
Use the supplier-specific selection notes in this editable brief. Edits remain on this page until you copy them; opening the request form selects the factory but does not automatically send or carry over the edited text.