WOODWORKING MACHINERY
MACHINERY DIRECTORY
Explore equipment for slicing and peeling wood veneer.
The BB1228 record describes horizontal slicing from a wood block, while the JLXQ260-50B record describes rotary peeling. Compare the input format and required veneer output before comparing numerical dimensions. Ask whether a listed dimension applies to the incoming block, log, stroke or finished veneer. State timber species, incoming size and desired veneer thickness. The slicing range is material-dependent, so confirm the clamping and handling arrangement in the offer. Request the exact configuration together with knife, preparation, handling and downstream requirements. Veneer clipping is a separate step after slicing or peeling: the MQJ410 shear table prints its 4100 length and 50 stack height without units, so confirm units and edge quality at full stack height before comparing shears.
Use the same component or incoming material to ask each supplier a comparable question. The entries below identify a selection issue for each published record. They are not test scores or a ranking of manufacturers.
| Published equipment | Selection issue | Ask in the quotation |
|---|---|---|
| Jilongchang MQJ410 hydraulic veneer shear Qingdao Jilongchang Machinery Equipment | 4100 shearing length and 50 shearing thickness as printed, shared hydraulics with MQJ160–MQJ360; source table has no units. | Confirm units, the meaning of the thickness value as stack height, blade and clamp details and the safety arrangement. |
| JLXQ260-50B veneer peeling machine Shandong Jinlun Machinery Manufacturing | Nominal machine size is not the whole log specification | Which standard speed and control configuration are offered? |
| BB1228 horizontal veneer slicer Qingdao Haozhonghao Woodworking Machinery | Block dimensions are not finished veneer dimensions | Which block size and veneer format are accepted for this material? |
A missing answer stays unconfirmed. Working area, wheel diameter, tape height, motor ratings and process counts must retain their original labels; they are not interchangeable capacities. Keep accessories, handling, utilities and the sample acceptance job explicit when comparing offers.
Numeric ranges match where capacities overlap. Selected values must all match; series combinations require manufacturer confirmation.
0 products excluded because selected specifications are not published.
Veneer machines
The Jilongchang MQJ410 is the longest hydraulic veneer shear in the MQJ series: shearing length 4100, shearing thickness 50, oil pump 4, feed motor 0.1, working pressure 10, 5180 × 1680 × 1600 overall and 3550 net weight. The source table prints no units. It suits veneer sheets …
Veneer machines
The JLXQ260-50B specification appears on Jinlun’s eight-foot veneer peeling machine page. It lists a maximum log length of 2600 mm and a maximum log diameter of 500 mm. Veneer thickness is stated as 0.3 to 4.0 mm, with a processing speed of 30 to 75 metres per minute. Listed pow…
Veneer machines
The HOLZH BB1228 is a horizontal veneer slicer for decorative veneer used in plywood, furniture and flooring. It takes a wood block up to 2600 × 1300 × 900 mm, has a 2000 mm working stroke and slices veneer from 0.2 to 3 mm thick, depending on the wood. Servo feeding advances th…