WOODWORKING MACHINERY
MODEL SELECTION & PROCUREMENT
Documented manufacturer: Shandong Jinlun Machinery Manufacturing
The JLXQ260-50B specification appears on Jinlun’s eight-foot veneer peeling machine page. It lists a maximum log length of 2600 mm and a maximum log diameter of 500 mm.
The JLXQ260-50B specification appears on Jinlun’s eight-foot veneer peeling machine page. It lists a maximum log length of 2600 mm and a maximum log diameter of 500 mm. Veneer thickness is stated as 0.3 to 4.0 mm, with a processing speed of 30 to 75 metres per minute. Listed power is 60 kW. The machine dimensions are 6100 by 2150 by 1600 mm, with an approximate weight of 11000 kg. The description includes treated rollers, guide rails and a numerical control system.
Manufacturer data checked 2026-09-26 · Source [1].
| Specification | Documented value | Reviewed |
|---|---|---|
| Maximum log length | 2600 mm | 2026-09-26 |
| Veneer thickness | 0.3–4.0 mm | 2026-09-26 |
| Maximum log diameter | 500 mm | 2026-09-26 |
| Processing speed | 30–75 m/min | 2026-09-26 |
| Power | 60 kW | 2026-09-26 |
The JLXQ260-50B is the table variant for a veneer peeling machine. Use both incoming log limits and the required veneer to screen the proposal.
The upper peeling speed and smallest thickness do not establish a guaranteed combination for every species or log condition; speed and knife options must be named separately.
Editorial interpretation of the manufacturer-published values, not a witnessed performance test.
| Published item | What it describes | Your next check |
|---|---|---|
| 2600 mm length / 500 mm diameter | Incoming log limits | Check both dimensions against representative stock. |
| 0.3–4.0 mm thickness | Published veneer range | Agree target variation and surface condition at your actual thickness. |
| 30–75 m/min | Published processing speed | Define how cutting, stacking, cores and stops affect sustained accepted output. |
The JLXQ260-50B table gives maximum log length of 2600 mm and diameter of 500 mm. Check both against the proposed incoming logs and retain the exact variant in the quotation. The veneer-thickness range and processing-speed range do not establish a guaranteed combination for every species and log condition. The page mentions optional speed and knife functions, which should be separated from the standard quoted configuration.
Provide log species, incoming size range and target veneer thickness when requesting an offer. Confirm the standard speed and control configuration: the page also mentions optional speed and knife functions, which should be specified separately. Discuss how peeling connects to veneer cutting, stacking and the handling of remaining cores.
Provide the species, incoming log range and target veneer thicknesses. Ask the supplier to describe the peeling setup, numerical controls and any option used in a demonstration. Record how thickness and surface condition will be assessed and how material enters and leaves the machine. Identify veneer cutting, stacking, core removal and any separate handling equipment so that the complete proposal has a clear boundary.
Treat the JLXQ260-50B as the peeling stage; speed is not finished dry-veneer output.
These are requested purchasing deliverables, not evidence already supplied or tests witnessed by WoodworkMill. Tie each response to the exact model and quoted options.
| Required clarification | Scope for this purchase | Requested record |
|---|---|---|
| Lathe configuration | Knife, drive, speed options and remaining core | Dated machine and tooling schedule |
| Veneer result | Thickness variation, usable sheet and rejects | Representative log trial with measurement method |
| Connected stages | Clipping, stacking, drying and discharge | Line scope and handling interface drawing |
No. Use JLXQ260-50B and its numerical table in the quotation, and confirm the standard control and knife configuration independently of the nominal size description.
No representative production run has been witnessed by WoodworkMill for this record. Agree the material, tooling, operator tasks, trial duration and allowed defects. Count first-pass accepted parts separately from parts accepted after rework, and include agreed stoppages when reporting sustained output.
Ask each bidder to answer the same brief and list standard equipment, selected options, excluded auxiliaries, commissioning, training and spare parts separately. Price, delivery time and warranty remain quotation-specific; this page supplies no current offer.
The numerical and configuration claims above come from the named manufacturer’s product material retained privately by WoodworkMill. Review dates appear below. Selection and acceptance suggestions are WoodworkMill editorial guidance; they are not claims that a suggested fixture, test, safety function or accessory is fitted. A manufacturer profile does not verify this model’s certification, current availability or destination compliance. Resolve the explicitly missing or conflicting limits in writing before ordering.
Manufacturer source · checked 2026-09-26. Model description and the specification rows above.
Updated 2026-10-11. The comparison table, enquiry brief, questions and suggested trial are written to help you buy; the specification values come from the manufacturer.
Where a figure is missing or two figures disagree, ask the factory to confirm the value in writing for your order.
Edit the fields below, then copy the brief or open a sourcing request with this model selected. The edited brief stays on this page and is not automatically sent or added to that form.