WOODWORKING MACHINERY
MACHINERY DIRECTORY
Compare documented stock width, thickness, minimum length and cutter removal for solid-wood thickness planing. Published dimensions and feed values remain configuration questions until a sample trial.
The MB203D table lists a maximum width of 300 mm, a maximum stock thickness of 200 mm and a minimum length of 260 mm. Those are input limits; they are separate from the upper and lower cutting allowances of 4 mm and 2 mm. The adjacent MB203F record describes different thickness and minimum-length limits, so retain the exact suffix. Ask about minimum thickness, incoming warp, hold-down and feed support. Compare the two faces separately in a trial using your normal timber. Agree output and finished tolerance on your own timber. The MB203D motor-power entry needs explaining by the factory; obtain a complete electrical and extraction schedule before planning installation.
Use the same component or incoming material to ask each supplier a comparable question. The entries below identify a selection issue for each published record. They are not test scores or a ranking of manufacturers.
| Published equipment | Selection issue | Ask in the quotation |
|---|---|---|
| Donghe MB203D double-sided thickness planer Yantai Donghe Woodworking Machinery | 300 mm width, 200 mm maximum stock thickness and 260 mm minimum length; removal differs on the two faces. | Confirm minimum thickness, the offered cutter arrangement, the scope of the 4 kW entry and trial results for your actual timber. |
A missing answer stays unconfirmed. Working area, wheel diameter, tape height, motor ratings and process counts must retain their original labels; they are not interchangeable capacities. Keep accessories, handling, utilities and the sample acceptance job explicit when comparing offers.
Numeric ranges match where capacities overlap. Selected values must all match; series combinations require manufacturer confirmation.
0 products excluded because selected specifications are not published.
Wood thickness planers
The Donghe MB203D is a double-sided woodworking thickness planer documented for material up to 300 mm wide and 200 mm thick, with a minimum planing length of 260 mm. Its upper and lower cutting allowances differ, so this record separates stock dimensions, material removal and fe…