WOODWORKING MACHINERY
MACHINERY DIRECTORY
Explore finger jointing equipment for joining timber components.
The CFC25 record combines finger forming, adhesive application, pressing and cutting. It lists a standard finger length and an optional alternative, together with a single-component PUR adhesive arrangement. The introductory description and technical table differ on a thickness limit; the catalogue therefore leaves that conflict for supplier confirmation. Describe incoming lengths, timber cross-section and the desired joined output. Have the quotation identify the model variant, finger geometry, adhesive system and handling scope. Ask for the cycle rate on your own timber sizes.
Use the same component or incoming material to ask each supplier a comparable question. The entries below identify a selection issue for each published record. They are not test scores or a ranking of manufacturers.
| Published equipment | Selection issue | Ask in the quotation |
|---|---|---|
| CFC25 compact finger jointing machine Yantai Bohai Woodworking Machinery | Resolve the cross-section discrepancy before selection | Which dated specification resolves the timber-thickness limit? |
A missing answer stays unconfirmed. Working area, wheel diameter, tape height, motor ratings and process counts must retain their original labels; they are not interchangeable capacities. Keep accessories, handling, utilities and the sample acceptance job explicit when comparing offers.
Numeric ranges match where capacities overlap. Selected values must all match; series combinations require manufacturer confirmation.
0 products excluded because selected specifications are not published.
Timber jointing
The Bohai CFC25 is a compact finger-jointing machine that forms the fingers, applies glue, presses the joint and cuts the lamella in one automatic sequence. It accepts timber at least 1300 mm long and 75 to 250 mm wide. The standard finger is 15 mm long, with a 20 mm finger as a…