WOODWORKING MACHINERY
MODEL SELECTION & PROCUREMENT
Documented manufacturer: Weihai Deli Woodworking Machinery
The Weihai Deli MFB104 is an automatic edge banding machine for panels 10 to 60 mm thick, at least 60 mm wide and 160 mm long. It applies edge tape 10 to 65 mm wide at a feed speed of 18 m/min and runs on 0.7 MPa compressed air.
The Weihai Deli MFB104 is an automatic edge banding machine for panels 10 to 60 mm thick, at least 60 mm wide and 160 mm long. It applies edge tape 10 to 65 mm wide at a feed speed of 18 m/min and runs on 0.7 MPa compressed air. The machine weighs 1300 kg net and measures 3860 × 750 × 1400 mm.
Manufacturer data checked 2026-09-26 · Source [1].
| Specification | Documented value | Reviewed |
|---|---|---|
| Panel thickness | 10–60 mm | 2026-09-26 |
| Minimum panel width | 60 mm | 2026-09-26 |
| Feed speed | 18 m/min | 2026-09-26 |
| Minimum panel length | 160 mm | 2026-09-26 |
| Air pressure | 0.7 MPa | 2026-09-26 |
The listed feed range is 18 m/min. This arithmetic estimates evenly spaced boards in one feed lane; it excludes setup, finish limits, rejected boards, loading constraints and stops. It is not a capacity claim or a parts-per-shift guarantee.
Ideal passage rate = feed speed × 1000 / (board length + gap).
Use only a supplier-confirmed feed setting for your material and finish. Measure first-pass accepted output separately on the actual job.
An automatic edge bander feeds a panel along a conveyor and seals its edge with tape in one pass: glue on the panel edge, tape pressed on, ends cut, overhangs trimmed. The MFB104 suits cabinet and furniture shops banding panel parts in daily production; confirm your tape material with Deli.
At 3.86 m long, it fits a small workshop while still automating the full gluing and trimming sequence.
Panel thickness (10–60 mm) and tape width (10–65 mm) are separate limits: tape wider than the panel leaves overhang for the trimmers to remove. The 60 mm minimum width and 160 mm minimum length set the smallest part that feeds safely; shelves, drawer fronts and doors are usually well above that, narrow strips may not be.
At 18 m/min, a 600 mm part passes in two seconds. Real output depends on the gap between parts and how fast the operator loads.
| Topic | Published value | Ask for |
|---|---|---|
| Panel thickness | 10–60 mm | Station list for the offered machine |
| Panel size | 60 mm wide, 160 mm long minimum | Handling of smaller parts |
| Tape width | 10–65 mm | Tape thickness range |
| Feed | 18 m/min | Glue pot capacity and heating time |
| Air | 0.7 MPa | Air consumption |
| Power | Two figures in the source | One confirmed figure for the offered machine |
| Size and weight | 3860 × 750 × 1400 mm; 1300 kg | Infeed and return space |
Among the edge banders on this site, the Pinmai PE-2C7J is another straight-line automatic machine, and the Dezhou Ruiao swing-arm edge bander handles curved edges. Panels come to the bander after sizing on a saw such as the Yongqiang SMV8D. Weihai Deli also builds semi-automatic models for lower volumes.
Send your smallest part and a few standard parts with the tape you use. Ask Deli to band them and record glue temperature, feed and trimming setup. Check the glue line, corners and trimmed edges.
| Requested document | Purchasing purpose |
|---|---|
| MFB104 specification sheet | Fixes stations, limits and power |
| Electrical diagram | Matches the supply |
| Supply list | Shows trimming units and consumables |
| Layout drawing | Plans space and air connection |
The source shows two power figures. Ask Deli to confirm one for the offered machine.
18 m/min is the feed. Ask Deli to estimate parts per hour for your sizes and loading.
The minimum width is 60 mm. Narrower parts need another method.
Manufacturer source · checked 2026-09-26. Model description and the specification rows above.
Updated 2026-10-11. The comparison table, enquiry brief, questions and suggested trial are written to help you buy; the specification values come from the manufacturer.
Where a figure is missing or two figures disagree, ask the factory to confirm the value in writing for your order.
Edit the fields below, then copy the brief or open a sourcing request with this model selected. The edited brief stays on this page and is not automatically sent or added to that form.