WOODWORKING MACHINERY
MODEL SELECTION & PROCUREMENT
Documented manufacturer: Qingdao Zhongding Machinery
The ZD400T sliding table saw uses a 400 mm main blade and lists a cutting height of 120 mm at 90 degrees or 80 mm at 45 degrees. Main blade lifting is electrical, while saw group tilting is manual with digital angle indication.
The ZD400T sliding table saw uses a 400 mm main blade and lists a cutting height of 120 mm at 90 degrees or 80 mm at 45 degrees. Main blade lifting is electrical, while saw group tilting is manual with digital angle indication. The main saw motor is 5.5 kW and the scoring motor is 1.1 kW. Cutting width between the saw blade and rip fence is 1250 mm. Sliding table options are presented with lengths of 3200 and 3800 mm, and gross weight is listed as 1100 kg.
Manufacturer data checked 2026-09-26 · Source [1].
| Specification | Documented value | Reviewed |
|---|---|---|
| Main blade diameter | 400 mm | 2026-09-26 |
| Cutting height at 90° | 120 mm | 2026-09-26 |
| Main motor power | 5.5 kW | 2026-09-26 |
| Cutting height at 45° | 80 mm | 2026-09-26 |
| Scoring motor power | 1.1 kW | 2026-09-26 |
The ZD400T gives separate cutting heights at 90 and 45 degrees and alternative 3200 / 3800 mm table lengths. Select the version from the panel format, angle and available supported route.
The 120 mm upright limit cannot be used as the bevel limit; the 1100 kg gross weight is not a net machine-weight comparison.
Editorial interpretation of the manufacturer-published values, not a witnessed performance test.
| Published item | What it describes | Your next check |
|---|---|---|
| 120 mm at 90° / 80 mm at 45° | Angle-specific cutting height | Use the value for the required cut angle. |
| 3200 or 3800 mm table | Alternative versions | Specify the selected table rather than treating both as included. |
| 5.5 kW main / 1.1 kW scoring | Separate drive ratings | Include main blade and scoring setup for the required panel edge. |
The ZD400T lists 120 mm cutting height at 90 degrees and 80 mm at 45 degrees. A requirement for thick bevel cuts should use the relevant figure rather than the larger upright-cut value. The 3200 and 3800 mm sliding tables are alternatives, not a single guaranteed included table. Gross weight of 1100 kg is a shipping label and should not be compared as if it were another manufacturer’s net machine weight.
Choose the table configuration using your panel sizes and available loading space. Ask the manufacturer to confirm table width, blade equipment and the overall layout for the selected version. Provide the materials and finished edge requirements so that the scoring setup and blade choice can be included in the quotation.
Attach the panel format and a cutting plan including the intended angles. Ask for the table version, blade and scoring equipment used in a sample cut, and identify the face and edge to inspect. Record the supported panel path and extraction setup. Request packed dimensions and weight separately from the installation drawing, and confirm which accessories and services belong to the selected table configuration.
Select the ZD400T table length and angle-specific capacity; company scale claims are not independently verified.
These are requested purchasing deliverables, not evidence already supplied or tests witnessed by WoodworkMill. Tie each response to the exact model and quoted options.
| Required clarification | Scope for this purchase | Requested record |
|---|---|---|
| Saw configuration | Table version, blade and scoring arrangement | Dated sheet with angle-specific cutting limits |
| Installation/shipping | Supported loading path and packed dimensions | Separate installed and packing drawings/weights |
| Company claims | Published scale and displayed ISO/CE claims | Current issuer-verifiable documents; omit unsupported scale |
That is not supported by the listed limits: the source gives 80 mm at 45 degrees. State the stock and angle in the enquiry and require a documented solution rather than adopting the 90-degree figure.
No representative production run has been witnessed by WoodworkMill for this record. Agree the material, tooling, operator tasks, trial duration and allowed defects. Count first-pass accepted parts separately from parts accepted after rework, and include agreed stoppages when reporting sustained output.
Ask each bidder to answer the same brief and list standard equipment, selected options, excluded auxiliaries, commissioning, training and spare parts separately. Price, delivery time and warranty remain quotation-specific; this page supplies no current offer.
The numerical and configuration claims above come from the named manufacturer’s product material retained privately by WoodworkMill. Review dates appear below. Selection and acceptance suggestions are WoodworkMill editorial guidance; they are not claims that a suggested fixture, test, safety function or accessory is fitted. A manufacturer profile does not verify this model’s certification, current availability or destination compliance. Resolve the explicitly missing or conflicting limits in writing before ordering.
Manufacturer source · checked 2026-09-26. Model description and the specification rows above.
Updated 2026-10-11. The comparison table, enquiry brief, questions and suggested trial are written to help you buy; the specification values come from the manufacturer.
Where a figure is missing or two figures disagree, ask the factory to confirm the value in writing for your order.
Edit the fields below, then copy the brief or open a sourcing request with this model selected. The edited brief stays on this page and is not automatically sent or added to that form.