WOODWORKING MACHINERY
A precision sliding saw moves the blade across a part held on the table, giving accurate crosscuts and mitres on solid-wood components. With a 350 mm cut width, the XTJ-1350 suits frame parts, rails, stiles, mouldings and short boards in furniture, door and joinery workshops. It is a parts saw: full sheets belong on a sliding table saw.
MODEL SELECTION & PROCUREMENT
XTJ-1350 precision sliding circular saw
Documented manufacturer: Qingdao Xinmengyuan Woodworking Machinery
The Qingdao Xinmengyuan XTJ-1350 is a precision sliding circular saw that cuts up to 350 mm wide and 80 mm thick. It takes blades up to 405 mm in diameter on a 25.4 mm spindle running at 6500 rpm.
Check the modelDocumented values and source dates →Check your applicationFit, limits and questions to ask →Prepare the purchaseCopy a specific enquiry brief →
Documented machine and specification
The Qingdao Xinmengyuan XTJ-1350 is a precision sliding circular saw that cuts up to 350 mm wide and 80 mm thick. It takes blades up to 405 mm in diameter on a 25.4 mm spindle running at 6500 rpm. The product page lists two motor ratings, 2.2 kW and 3 kW.
Manufacturer data checked 2026-09-26 · Source [1].
| Specification | Documented value | Reviewed |
|---|---|---|
| Maximum cutting width | 350 mm | 2026-09-26 |
| Maximum cutting thickness | 80 mm | 2026-09-26 |
| Spindle diameter | 25.4 mm | 2026-09-26 |
| Maximum blade diameter | 405 mm | 2026-09-26 |
| Spindle speed | 6500 rpm | 2026-09-26 |
What the XTJ-1350 is built to do
Cut width, thickness and blade
The two capacity figures work together: a part up to 350 mm wide and 80 mm thick fits one pass. The 405 mm maximum blade and 25.4 mm spindle tell you which blades you can fit. The spindle runs at 6500 rpm; the manual should give the blade sizes for that speed.
Motor and angle entries
The page shows 2.2 kW and 3 kW. Ask which one is in the offer, and size your electrical connection to it. The angle entry on the page uses an unclear unit, so ask for the mitre and bevel range in degrees before relying on it for angled work.
Configuration and installation questions
| Topic | Published value | Ask for |
|---|---|---|
| Cut width | 350 mm | Width at 45° |
| Thickness | 80 mm | Thickness at bevel angles |
| Blade | Up to 405 mm; 25.4 mm spindle | Blade supplied |
| Speed | 6500 rpm | Blade sizes for that speed |
| Motor | 2.2 or 3 kW | Rating on the offer |
| Angle | Unit unclear | Range in degrees |
Compare with other saws
Among the panel saws on this site, the Yongqiang SMV8D and the Zhongding ZD400T are sliding table saws for full sheets. Xinmengyuan also makes double-disc angle saws for cutting both ends of frame parts at once, which suits higher volumes. Our guide to sliding table saw capacity covers what to compare on the full-sheet saws.
A trial on your own parts
Send drawings of the straight, mitre or bevel cuts you need and a few parts. Ask Xinmengyuan to cut them with the fixture and guard it proposes, and record the blade, finished dimensions and edge quality.
Documents to request
| Requested document | Purchasing purpose |
|---|---|
| Corrected XTJ-1350 sheet | Fixes motor and angle range |
| Accessory list | Shows fixtures, guards and blade |
| Electrical diagram | Matches your supply |
| Operating manual | Sets blade and speed |
Your model-specific enquiry checklist
- Part dimensions and material
- Cuts needed: straight, mitre, bevel
- Volume per day
- Power supply
- Fixtures you expect
Buyer questions
Is it 2.2 or 3 kW?
Both appear on the page. Ask which motor the quotation includes.
Can it cut 45° mitres?
Ask for the angle range in degrees and the cut width at 45°.
Can it cut panels?
It cuts parts up to 350 mm wide. Full sheets need a sliding table saw.
Confirm in writing before ordering
- Motor rating
- Angle range in degrees and capacity at angle
- Blade, fixtures and guards supplied
- Electrical supply
- Warranty and spare parts
Sources
- Qingdao Xinmengyuan Woodworking Machinery — XTJ-1350 precision sliding circular saw product page
Manufacturer source · checked 2026-09-26. Model description and the specification rows above.
- Buying guidance on this page
Updated 2026-10-11. The comparison table, enquiry brief, questions and suggested trial are written to help you buy; the specification values come from the manufacturer.
Where a figure is missing or two figures disagree, ask the factory to confirm the value in writing for your order.
Take a useful brief into the enquiry
Edit the fields below, then copy the brief or open a sourcing request with this model selected. The edited brief stays on this page and is not automatically sent or added to that form.