WOODWORKING MACHINERY
MODEL SELECTION & PROCUREMENT
Documented manufacturer: Hangzhou Zhanxiong Intelligent Equipment
The SMART-PR1 is described as a cantilever four-axis machining centre for door, wall and cabinet components. The product name establishes the four-axis arrangement and cantilever configuration, while the photograph shows the overall machine layout and separate control position.
The SMART-PR1 is described as a cantilever four-axis machining centre for door, wall and cabinet components. The product name establishes the four-axis arrangement and cantilever configuration, while the photograph shows the overall machine layout and separate control position. The page does not provide a numerical working envelope, spindle rating or travel speed for this model. Those values remain to be confirmed for an actual quotation, rather than being inferred from the SMART name or from other machines in the range.
Manufacturer data checked 2026-09-26 · Source [1].
| Specification | Documented value | Reviewed |
|---|---|---|
| Axis arrangement | Four axes | 2026-09-26 |
| Machine layout | Cantilever | 2026-09-26 |
| Application | Door, wall and cabinet components | 2026-09-26 |
The SMART-PR1 listing names a cantilever four-axis machining centre for door, wall and cabinet components. The next selection step is a drawing-based explanation of axis motion, tool access and holding.
Working envelope, spindle rating and travel speed were not established. Four-axis naming does not prove simultaneous motion or suitability for an undrawn part.
Editorial interpretation of the manufacturer-published values, not a witnessed performance test.
| Published item | What it describes | Your next check |
|---|---|---|
| Four-axis | Named machine arrangement | Ask which axes move during each required operation. |
| Cantilever configuration | Named structural layout | Request loading, support and usable-space drawings. |
| No numerical envelope | Selection gap | Obtain model-specific travel and clearance with the intended tools and fixtures. |
The manufacturer names SMART-PR1 as a cantilever four-axis machining centre. This establishes the source’s machine designation, but not the axis kinematics, simultaneous movement, spindle rating or usable machining envelope. A four-axis designation is different from the JQ49-4 four-process arrangement. Ask for a drawing-based explanation of the axes and tool access for your part rather than inferring capability from either label.
Provide drawings of the shaped components, the required machining faces and the longest workpiece. Ask the manufacturer to define axis movement, work holding, tool changes and the usable machining envelope. Clarify whether the quoted machine includes the loading supports and extraction equipment shown or discussed during the proposal.
Send a shaped-component drawing that identifies the surfaces to be machined, longest blank and required fixtures. Ask the supplier to show positioning, axis movement and tool access throughout the proposed process. Record any repositioning, tool changes and separate operations in an agreed demonstration. Require the workholding and loading supports used in that demonstration to be identified in the written quotation.
SMART-PR1 axis motion, machining envelope and spindle specification are not confirmed.
These are requested purchasing deliverables, not evidence already supplied or tests witnessed by WoodworkMill. Tie each response to the exact model and quoted options.
| Required clarification | Scope for this purchase | Requested record |
|---|---|---|
| Missing machine data | Travels, axis arrangement and spindle | Dated SMART-PR1 configuration sheet |
| Workholding proof | Part faces, repositioning and fixtures | Sample-part programme and fixture demonstration |
| Automation boundary | Software, conveyors, loading and service | Included hardware/software and commissioning scope |
No. Four-axis describes an axis arrangement in the SMART-PR1 listing; four-process describes the JQ49-4 head arrangement. Neither label substitutes for an operation-by-operation explanation.
No representative production run has been witnessed by WoodworkMill for this record. Agree the material, tooling, operator tasks, trial duration and allowed defects. Count first-pass accepted parts separately from parts accepted after rework, and include agreed stoppages when reporting sustained output.
Ask each bidder to answer the same brief and list standard equipment, selected options, excluded auxiliaries, commissioning, training and spare parts separately. Price, delivery time and warranty remain quotation-specific; this page supplies no current offer.
The numerical and configuration claims above come from the named manufacturer’s product material retained privately by WoodworkMill. Review dates appear below. Selection and acceptance suggestions are WoodworkMill editorial guidance; they are not claims that a suggested fixture, test, safety function or accessory is fitted. A manufacturer profile does not verify this model’s certification, current availability or destination compliance. Resolve the explicitly missing or conflicting limits in writing before ordering.
Manufacturer source · checked 2026-09-26. Model description and the specification rows above.
Updated 2026-10-11. The comparison table, enquiry brief, questions and suggested trial are written to help you buy; the specification values come from the manufacturer.
Where a figure is missing or two figures disagree, ask the factory to confirm the value in writing for your order.
Edit the fields below, then copy the brief or open a sourcing request with this model selected. The edited brief stays on this page and is not automatically sent or added to that form.