WOODWORKING MACHINERY
MODEL SELECTION & PROCUREMENT
Documented manufacturer: Xingtai Yashida Machinery / YSDMILL
The MJ3210AZ automatic vertical band saw is the variant named in the technical table on the manufacturer’s MJ3210Z/MJ3210AZ page. The table lists a wheel diameter of 1060 mm and a wheel speed of 700 rpm.
The MJ3210AZ automatic vertical band saw is the variant named in the technical table on the manufacturer’s MJ3210Z/MJ3210AZ page. The table lists a wheel diameter of 1060 mm and a wheel speed of 700 rpm. Blade dimensions are 7100 by 125 by 1.15 mm. Maximum log diameter is stated as 800 mm and motor power as 22 kW. Electric wheel lifting is included in the described arrangement. The page heading uses the shorter MJ3210Z name, so the table variant should be specified when requesting an offer.
Manufacturer data checked 2026-09-26 · Source [1].
| Specification | Documented value | Reviewed |
|---|---|---|
| Saw wheel diameter | 1060 mm | 2026-09-26 |
| Table model | MJ3210AZ | 2026-09-26 |
| Maximum log diameter | 800 mm | 2026-09-26 |
| Wheel speed | 700 rpm | 2026-09-26 |
| Motor power | 22 kW | 2026-09-26 |
The source heading uses MJ3210Z while its technical table identifies MJ3210AZ. This record follows the table variant and requires that same identification in the quotation.
Do not mix the 1060 mm wheel diameter with the 800 mm maximum log diameter, or silently transfer specifications between the two names.
Editorial interpretation of the manufacturer-published values, not a witnessed performance test.
| Published item | What it describes | Your next check |
|---|---|---|
| MJ3210AZ | Table variant | Use this identifier together with a dated model-specific specification. |
| 1060 mm wheel / 800 mm log | Different geometries | Apply log diameter to incoming stock and wheel size to the saw arrangement. |
| 7100 × 125 × 1.15 mm blade | Blade specification | Confirm compatibility, tensioning and maintenance for the proposed use. |
The source heading uses MJ3210Z while the technical table identifies MJ3210AZ. This page follows the table variant; neither name should be silently treated as interchangeable. The 1060 mm wheel diameter is different from the stated 800 mm maximum log diameter. Blade dimensions, motor power and wheel lifting belong to the named table configuration and should be confirmed against the machine actually supplied.
Provide log dimensions, timber species and the board sizes you plan to produce. Confirm the supplied carriage, feeding controls and blade tensioning arrangement with the manufacturer. Discuss loading, extraction and blade maintenance as part of the installation, and ensure that the quotation explicitly identifies the model variant and its associated specification.
Provide log dimensions, species and the required boards, and ask for a cut sequence using the offered carriage and feed controls. Record loading, holding, blade and board-removal arrangements in an acceptance demonstration. If the supplier proposes a wider line, distinguish the saw, carriage, conveyors and maintenance equipment. Ask for destination-specific installation and training terms instead of treating a company service description as a guaranteed included service.
Use the MJ3210AZ table configuration and request order-specific evidence of the described workshop tests.
These are requested purchasing deliverables, not evidence already supplied or tests witnessed by WoodworkMill. Tie each response to the exact model and quoted options.
| Required clarification | Scope for this purchase | Requested record |
|---|---|---|
| Configuration scope | MJ3210AZ version, carriage, feeding and blade | Dated supply schedule and installation drawing |
| Dispatch trial | Electrical/hydraulic functions and actual timber cuts | Order-linked test video and measured result |
| Overseas service | Personnel, travel, training and maintenance | Destination-specific service offer and cost boundaries |
It follows the variant identified in the manufacturer’s technical table. Ask the supplier to reconcile the heading and table and attach the specification for the delivered variant.
No representative production run has been witnessed by WoodworkMill for this record. Agree the material, tooling, operator tasks, trial duration and allowed defects. Count first-pass accepted parts separately from parts accepted after rework, and include agreed stoppages when reporting sustained output.
Ask each bidder to answer the same brief and list standard equipment, selected options, excluded auxiliaries, commissioning, training and spare parts separately. Price, delivery time and warranty remain quotation-specific; this page supplies no current offer.
The numerical and configuration claims above come from the named manufacturer’s product material retained privately by WoodworkMill. Review dates appear below. Selection and acceptance suggestions are WoodworkMill editorial guidance; they are not claims that a suggested fixture, test, safety function or accessory is fitted. A manufacturer profile does not verify this model’s certification, current availability or destination compliance. Resolve the explicitly missing or conflicting limits in writing before ordering.
Manufacturer source · checked 2026-09-26. Model description and the specification rows above.
Updated 2026-10-11. The comparison table, enquiry brief, questions and suggested trial are written to help you buy; the specification values come from the manufacturer.
Where a figure is missing or two figures disagree, ask the factory to confirm the value in writing for your order.
Edit the fields below, then copy the brief or open a sourcing request with this model selected. The edited brief stays on this page and is not automatically sent or added to that form.