WOODWORKING MACHINERY
MODEL SELECTION & PROCUREMENT
Documented manufacturer: Shandong Zouping Shuanghuan Machinery
The MJH1200E is a hydraulic heavy horizontal band saw listed for logs up to 1200 mm in diameter. Its specification table gives a standard cutting length of 4500 mm and a maximum cutting thickness of 400 mm.
The MJH1200E is a hydraulic heavy horizontal band saw listed for logs up to 1200 mm in diameter. Its specification table gives a standard cutting length of 4500 mm and a maximum cutting thickness of 400 mm. Main motor power is 37 kW. The blade width range is 125 to 150 mm, with electric blade tensioning described in the table. The machine is listed at a weight of 7000 kg. The adjacent MJH1500E is a different capacity and power variant.
Manufacturer data checked 2026-09-26 · Source [1].
| Specification | Documented value | Reviewed |
|---|---|---|
| Maximum cutting thickness | 400 mm | 2026-09-26 |
| Maximum log diameter | 1200 mm | 2026-09-26 |
| Standard cutting length | 4500 mm | 2026-09-26 |
| Main motor power | 37 kW | 2026-09-26 |
| Blade width | 125–150 mm | 2026-09-26 |
The MJH1200E table lists a 1200 mm maximum log diameter, 4500 mm standard cutting length and 400 mm maximum cutting thickness. Match each limit to the stock and cut plan.
MJH1500E is a different capacity and power variant. Hydraulic wording does not establish that every loading, turning and clamping function is included.
Editorial interpretation of the manufacturer-published values, not a witnessed performance test.
| Published item | What it describes | Your next check |
|---|---|---|
| 1200 mm diameter | Incoming log limit | Check the largest and typical stock, including the proposed handling arrangement. |
| 4500 mm standard length | Listed configuration | A longer layout requires its own written confirmation. |
| 125–150 mm blade width | Blade range | Agree the blade, tensioning and maintenance arrangement for the actual timber. |
This record states 1200 mm maximum log diameter, 4500 mm standard cutting length and 400 mm maximum cutting thickness. These limits should be applied separately to the proposed stock and cutting plan. The adjacent MJH1500E is not an alternative label for the same capacity. The blade-width range and electric tensioning description should be confirmed for the exact saw and blade configuration in the offer.
Provide timber species, typical log lengths and the largest incoming diameter when discussing a saw arrangement. Confirm which hydraulic log handling functions are included and request a layout showing loading access and board removal. Specify the required blade and sharpening support, and compare the quoted model against its own capacity table.
Provide logs representing both the usual and maximum incoming sizes. Ask for a proposed cut pattern and a handling layout that shows loading, positioning, clamping and board removal. Record the blade, timber condition and finished-board acceptance criteria during any demonstration. Obtain a supply list for the hydraulic handling functions and auxiliaries rather than treating the word hydraulic as a complete log-handling specification.
Identify the MJH1200E length version and included hydraulic handling functions.
These are requested purchasing deliverables, not evidence already supplied or tests witnessed by WoodworkMill. Tie each response to the exact model and quoted options.
| Required clarification | Scope for this purchase | Requested record |
|---|---|---|
| Saw variant | Length configuration and hydraulic functions | Dated model sheet and accessory list |
| Log handling | Loading, clamping, turning and board removal | Layout and function-by-function supply boundary |
| Maintenance support | Blade type and workshop service tools | Consumables/spares list and operator documentation |
The complete supply scope is not established by the word hydraulic. Ask for a list and layout of loading, positioning, clamping and board removal for the offered MJH1200E.
No representative production run has been witnessed by WoodworkMill for this record. Agree the material, tooling, operator tasks, trial duration and allowed defects. Count first-pass accepted parts separately from parts accepted after rework, and include agreed stoppages when reporting sustained output.
Ask each bidder to answer the same brief and list standard equipment, selected options, excluded auxiliaries, commissioning, training and spare parts separately. Price, delivery time and warranty remain quotation-specific; this page supplies no current offer.
The numerical and configuration claims above come from the named manufacturer’s product material retained privately by WoodworkMill. Review dates appear below. Selection and acceptance suggestions are WoodworkMill editorial guidance; they are not claims that a suggested fixture, test, safety function or accessory is fitted. A manufacturer profile does not verify this model’s certification, current availability or destination compliance. Resolve the explicitly missing or conflicting limits in writing before ordering.
Manufacturer source · checked 2026-09-26. Model description and the specification rows above.
Updated 2026-10-11. The comparison table, enquiry brief, questions and suggested trial are written to help you buy; the specification values come from the manufacturer.
Where a figure is missing or two figures disagree, ask the factory to confirm the value in writing for your order.
Edit the fields below, then copy the brief or open a sourcing request with this model selected. The edited brief stays on this page and is not automatically sent or added to that form.